Magnalium PAM Aluminum-Magnesium Dust ( Al / Mg Powder ) Fine 0.063mm 1000g - 1000g

Magnalium Aluminum-Magnesium Dust - 1000g
Other Names: Al-Mg Alloy Dust, Aluminum Magnesium Powder

CAS Number: Not specific (mixture of aluminum and magnesium)
Sum Formula: Variable (typically Al₉₀Mg₁₀ to Al₅₀Mg₅₀)
Molar Mass: Variable depending on alloy ratio
Appearance: Grey to silver metallic powder

Magnalium PAM is a powdered alloy of aluminum and magnesium. Its high reactivity, low density, and energetic characteristics make it suitable for specific chemical processes, particularly where reactivity with air, water, or oxidizers is advantageous.

Applications

Pyrotechnic Industry: Used in compositions for high-temperature flares, flash powders, and ignition compounds.
Chemical Synthesis: Applied in reduction reactions requiring strong, reactive reducing agents.
Materials Research: Studied in energetic material development and combustion science for reactivity analysis.

Safety
Signal Word: Danger

Hazard Statements:
H228: Flammable solid
H250: Catches fire spontaneously in contact with air
H251: Self-heating: may catch fire
H261: In contact with water, releases flammable gas

Precautionary Statements:
P210: Keep away from heat, sparks, open flames, hot surfaces – No smoking
P261: Avoid breathing dust or fumes
P280: Wear protective gloves/protective clothing/eye protection/face protection
P222: Do not allow contact with air
P231+P232: Handle under inert gas. Protect from moisture
P370+P378: In case of fire: use special powder for metal fires
P422: Store contents under inert gas

First Aid Measures
Eye Contact: Rinse with water for several minutes. Remove contact lenses if present. Seek medical attention.
Skin Contact: Rinse with cold water. Do not use hot water. Remove contaminated clothing.
Inhalation: Move to fresh air. Get medical help if symptoms persist.
Ingestion: Rinse mouth. Do not induce vomiting. Seek immediate medical advice.

Handling and Storage
Storage Conditions: Store in a tightly sealed container under inert gas, such as argon or nitrogen. Avoid exposure to air and moisture. Keep away from heat sources.
Handling Precautions: Handle in an inert atmosphere. Avoid generating dust. Ground all equipment and containers to prevent static discharge. Use non-sparking tools.