Dimethylformamide DMF Solvent - 10 000ml

N,N-Dimethylformamide (DMF)

CAS Number: 68-12-2
Chemical Formula: C₃H₇NO
Molar Mass: 73.09 g/mol
Appearance: Colorless to slightly yellow liquid with a faint amine-like odor.

Chemical and Physical Properties:

• Boiling Point: 153°C

• Melting Point: -61°C

• Density: 0.944 g/cm³ at 20°C

• Solubility: Miscible with water and most organic solvents

• Vapor Pressure: 380 Pa at 20°C

Applications:

• Industrial Solvent: Widely used in the production of synthetic fibers, films, and surface coatings.

• Chemical Synthesis: Serves as a reagent in various organic reactions, including formylation and amidation processes.

• Pharmaceutical Industry: Utilized as a solvent and crystallization medium in drug development.

• Electronics: Employed in the manufacturing of circuit boards and other electronic components.

Safety Information:

Signal Word: Danger

Hazard Statements:

• H226: Flammable liquid and vapor.

• H312: Harmful in contact with skin.

• H319: Causes serious eye irritation.

• H332: Harmful if inhaled.

• H360D: May damage the unborn child.

Precautionary Statements:

• P201: Obtain special instructions before use.

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.

• P280: Wear protective gloves/protective clothing/eye protection/face protection.

• P304 + P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.

• P308 + P313: IF exposed or concerned: Get medical advice/attention.

Health Hazards:

• Acute Exposure: Inhalation or skin contact can cause irritation, headache, dizziness, nausea, and vomiting.

• Chronic Exposure: Prolonged exposure may lead to liver and kidney damage.

• Reproductive Toxicity: Potential risk to the unborn child; may cause developmental defects.

First Aid Measures:

• Inhalation: Move the affected person to fresh air and keep them at rest in a position comfortable for breathing. Seek medical attention if symptoms persist.

• Skin Contact: Remove contaminated clothing immediately. Wash skin thoroughly with soap and water. Seek medical advice if irritation develops.

• Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and seek medical attention.

• Ingestion: Rinse mouth. Do not induce vomiting. Seek immediate medical attention.

Fire Fighting Measures:

• Suitable Extinguishing Media: Water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.

• Specific Hazards: Vapors may form explosive mixtures with air. Containers may explode when heated.

• Protective Equipment: Firefighters should wear self-contained breathing apparatus and full protective gear.

Storage:

• Store in a cool, dry, well-ventilated area away from heat sources, open flames, and incompatible materials such as strong acids and oxidizing agents.

• Keep container tightly closed and grounded to prevent static discharge.

*Note: The information provided is based on general data. Always refer to the Safety Data Sheet (SDS) provided by the supplier for detailed and accurate information.*