PRODUKTY
- ORGANICZNE(1303)
- NIEORGANICZNE(833)
- Chelaty(8)
- Pierwiastki(178)
- Wodorotlenki(26)
- Wodorki(19)
- Kwasy mineralne(23)
- Inne(23)
- Tlenki(87)
- Sole(465)
- Nanocząstki(3)
- TESTY KOLORYMETRYCZNE(27)
- SPRZĘT LABORATORYJNY(5478)
- Artykuły BHP(12)
- Art. Gospodarcze(6)
- *(1)
- Synteza organiczna(520)
- Przemysł(820)
Wersje językowe
Producenci
Krzemionka koloidalna Aerosil 200 Original do katalizatorów, żywic - 1000g = 20L
Cena regularna:
Cena regularna:
towar niedostępny
dodaj do przechowalni
0
Opis
Colloidal Silica – Aerosil® 200
Other Names: Fumed Silica, Pyrogenic Silica
CAS Number: 112945-52-5
Chemical Formula: SiO₂
Molar Mass: 60.08 g/mol
Appearance: White, amorphous, fluffy powder
Aerosil® 200 is a highly pure, colloidal fumed silica with a specific surface area of approximately 200 m²/g. It is widely used as a rheology control additive and thickening agent in various chemical systems due to its large surface area and thixotropic properties.
Chemical and Physical Properties
Density: ~2.2 g/cm³ (bulk density ~50 g/L)
Melting Point: >1600°C
Solubility in Water: Insoluble
Surface Area: ~200 m²/g (BET)
pH (4% aqueous dispersion): 3.7–4.5
Odor: Odorless
Applications
Catalysts: Used as a carrier and support for catalytic systems.
Resins and Composites: Enhances mechanical properties and thixotropy.
Paints and Coatings: Prevents sagging and settling; improves consistency.
Plastics and Rubber: Reinforcing filler in silicone and other elastomers.
Adhesives and Sealants: Controls viscosity and flow properties.
Safety
Signal Word: Warning
H350 (12.6%): May cause cancer [Danger Carcinogenicity]
H372 (46%): Causes damage to organs through prolonged or repeated exposure [Danger Specific target organ toxicity, repeated exposure]
H373 (29.4%): May causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]
P203, P260, P264, P270, P280, P318, P319, P405, and P501
Handling and Storage
Storage Conditions: Store in tightly sealed containers in a dry, cool, and well-ventilated location.
Handling Precautions: Avoid creating dust. Use local exhaust ventilation and appropriate PPE.
